Ah, May the Fourth – one of the punniest, funnest days of the year. You may have your Star Wars Day party at home, or at work (not every company takes the day off to play video games and watch Force Awakens on blu-ray like we’re doing here). And when it...
Tools You’ll Need: Side Cutters 2.5 mm Hex Key 1/16th Hex Key Phillips Screwdriver Ceramic Insulation Tape New Heater Cartridge CAUTION HOT! Make sure your 3D printer is turned off and unplugged. Let’s Get Started 1. Remove the extruder from the carriage 2. Remove old ceramic insulation tape 3....
These are the directions to replace the Silicone Insulated Heater Blocks on your Replicator 2X. If you are replacing both, simply follow the directions twice. Silicone is one way to provide insulated heater blocks for the dual extruder head on the MakerBot Rep 2X. The tools you’ll need: Metric hex...
You’ve received your new replacement MakerBot X-Axis Belt from Fargo 3D Printing and are wondering how to install it. This is… How To Replace Your MakerBot X-Axis Belt (Scroll to the bottom for the video tutorial.) The tools you’ll need: 5mm hex key 2.5mm hex key grease packet new X-Axis...
Today MakerBot released the Smart Extruder+, the upgraded version of its predecessor. And you know we love upgrades. The new improvements center on both the component systems and the sensor systems. MakerBot cites better internal hardware for less clogging and a longer life of the product. Smart Extruder+ Is Better 3D...
Get Started Here!
This week John is on train in the middle of Montana, so Eric steps in front of the camera for a change. In the end of October, Jake and John attended the Inside 3D Printing Conference and Expo in Santa Clara, CA. There as 3Dom USA, we released Buzzed...
A filament can be measured far beyond the very qualitative observations of how easy a material is to print with and the general look and feel of a finished product. For some, this may be all they need to know, and we certainly carry filaments where interesting finishes are...
As an engineer, when I use a 3D printer, I use it to print functional parts. Most of the time these parts have to withstand some sort of force or impact in order to function properly. PLA is normally good enough and gets the job done but if I...
It’s Education Week here at Fargo 3D. It’s a time to learn, explore and celebrate 3D printing in education, and the educators, teachers, and instructors who support it. As former students of great teachers, we value all that they do. Our motto is Get Printing. Stay Printing. Change the...
©2025 Fargo 3D Printing
Fargo 3D Printing is not associated with HID Global and their FARGO division.
LEGAL DISCLAIMER
THE PRODUCTS SOLD ON THIS WEBSITE SHOULD ONLY BE USED BY EXPERIENCED INDIVIDUALS, OR UNDER THE DIRECT SUPERVISION OF EXPERTS. NO WARRANTY OF THEIR SUITABILITY FOR ANY PURPOSE WHATSOEVER IS MADE OR OFFERED BY US. YOUR USE OF THE PRODUCTS SOLD ON THIS WEBSITE IS ENTIRELY AT YOUR OWN RISK. YOUR PURCHASE OR USE OF ANY PRODUCT HEREFROM SHALL SERVE AS YOUR EXPLICIT ACKNOWLEDGEMENT THAT YOU UNDERSTAND AND CONSENT TO THE FACT THAT WE HEREBY DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR, ANY HARM, LOSS (ECONOMIC OR OTHERWISE), INJURY OR DEATH RESULTING FROM THE ASSEMBLY OR OPERATION OF OUR PRODUCTS, EITHER AS INSTRUCTED OR OTHERWISE, AND AFFIRM THAT UNDER NO CIRCUMSTANCES SHALL YOU BE ENTITLED TO ANY DAMAGES OF ANY SORT WHATSOEVER RELATED TO YOUR USE OR MISUSE OF OUR PRODUCTS.